Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 640)

612 Unified IP MIB Reference
53-1002549-02
Route map rule display table
Route map rule display table
The following table contains MIB objects of the route map rule display entries. Use the show
telemetry rule-name command to display entries.
NOTE
This is a read-only table. The rouote map rule display table is not supported on the Brocade NetIron
CES and Brocade NetIron CER series devices.
Name, OID, and syntax Access Description
brcdRMapRuleDisplayTable
brcdIp.1.1.3.39.1.2.1 None The table contains various route map rule entries. A route map rule
instance (map and sequence number) contains only one rule name
and the same rule name is applied to multiple route maps.
brcdRMapRuleDisplayRuleN
ame
brcdIp.1.1.3.39.1.2.1.1.1
Syntax: DisplayString None Identifies the rule name.
brcdRMapRuleDisplayRoute
MapName
brcdIp.1.1.3.39.1.2.1.1.2
Syntax: DisplayString None Identifies the route map containing the rule.
brcdRMapRuleDisplaySeque
nce
brcdIp.1.1.3.39.1.2.1.1.3
Syntax: Unsigned32 None Identifies the instance sequence number.
brcdRMapRuleDisplayIpType
brcdIp.1.1.3.39.1.2.1.1.4
Syntax: InetAddressType None Identifies the IP type for the rule display:
•
1 - IPv4, or
•
2 - IPv6
A row is present if the corresponding IPv4 or IPv6 match ACL filter is
present.
brcdRMapRuleDisplayInputI
nterfaceList
brcdIp.1.1.3.39.1.2.1.1.5
Syntax: DisplayString Read-only A list of space-separated interface indices is the port membership
of the rule. An asterisk (*) indicates that the path is configured but
disabled.
brcdRMapRuleDisplayAclMa
tchFilter
brcdIp.1.1.3.39.1.2.1.1.6
Syntax: DisplayString Read-only A list of space-separated ACL match filter names or numbers used
in the rule.
NOTE: Any instances of route maps that are not bound, and have
no IPv4 or IPv6 match ACL filter
(brcdRMapRuleDisplayAclMatchFilter), are not displayed in
the brcdRMapRuleDisplay table.
brcdRMapRuleDisplayOutpu
tVlan
brcdIp.1.1.3.39.1.2.1.1.7
Syntax: DisplayString Read-only Identifies the next hop flood VLAN selected by the interface card.
Returns an empty string if there is no value.