Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 504)

476 Unified IP MIB Reference
53-1002549-02
BGP4 general variables
snBgp4ExternalDistance
brcdIp.1.2.11.1.31
Syntax: Integer
NOTE: This object is not supported
on the Brocade MLXe router,
Brocade NetIron MLX,
Brocade NetIron XMR,
Brocade NetIron CES, and
Brocade NetIron CER series
devices.
Read-write Determines the administrative distance for BGP external
routes.
Default: 200
snBgp4InternalDistance
brcdIp.1.2.11.1.32
Syntax: Integer
NOTE: This object is not supported
on the Brocade MLXe router,
Brocade NetIron MLX,
Brocade NetIron XMR,
Brocade NetIron CES, and
Brocade NetIron CER series
devices.
Read-write Determines the administrative distance for BGP internal
routes.
Default: 200
snBgp4LocalDistance
brcdIp.1.2.11.1.33
Syntax: Integer
NOTE: This object is not supported
on the Brocade MLXe router,
Brocade NetIron MLX,
Brocade NetIron XMR,
Brocade NetIron CES, and
Brocade NetIron CER series
devices.
Read-write Determines the administrative distance for BGP local routes.
Default: 200
snBgp4OperNumOfAttributes
brcdIp.1.2.11.1.34
Syntax: Integer32
NOTE: This object is not supported
on the Brocade MLXe router,
Brocade NetIron MLX,
Brocade NetIron XMR,
Brocade NetIron CES, and
Brocade NetIron CER series
devices.
Read-only Shows the operational number of attribute entries.
snBgp4NextBootMaxAttributes
brcdIp.1.2.11.1.35
Syntax: Integer
NOTE: This object is not supported
on the Brocade MLXe router,
Brocade NetIron MLX,
Brocade NetIron XMR,
Brocade NetIron CES, and
Brocade NetIron CER series
devices.
Read-write Defines the next boot maximum attribute entries.
Default: 10000 (which means to reset to the default)
Name, OID, and syntax Access Description