Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 518)

490 Unified IP MIB Reference
53-1002549-02
BGP4 network table
BGP4 network table
The BGP4 network table shows the weight used for the network.
NOTE
The following table is not supported on the Brocade MLXe router, Brocade NetIron MLX, Brocade
NetIron XMR, Brocade NetIron CES, and Brocade NetIron CER series devices.
snBgp4NeighRouteMapMapNam
e
brcdIp.1.2.11.9.1.1.3
Syntax: OCTET STRING Read-write Specifies the name of the route map you want to use. The
value of this object is an octet string. Each character of the
name is represented by one octet. There can be up to 32
octets in this object.
snBgp4NeighRouteMapRowStat
us
brcdIp.1.2.11.9.1.1.4
Syntax: Integer Read-write Controls the management of the table rows. The following
values can be written:
•
delete(3) – Deletes the row.
•
create(4) – Creates a new row.
•
modify(5) – Modifies an existing row.
If the row exists, then a SET with a value of create(4) returns a
"bad value" error. Deleted rows are removed from the table
immediately.
The following values can be returned on reads:
•
noSuch(0) – No such row.
•
invalid(1) – Row is inoperative.
•
valid(2) – Row exists and is valid.
Name, OID, and syntax Access Description
Name, OID, and syntax Access Description
snBgp4NetworkTable
brcdIp.1.2.11.10.1 None The BGP4 network table.
snBgp4NetworkIp
brcdIp.1.2.11.10.1.1.1
Syntax: IpAddress Read-only Shows the IP address for a network entry.
snBgp4NetworkSubnetMask
brcdIp.1.2.11.10.1.1.2
Syntax: IpAddress Read-only Shows the subnet mask for a network entry.
snBgp4NetworkWeight
brcdIp.1.2.11.10.1.1.3
Syntax: Integer Read-write Shows the weight of the neighbor connection.
Valid values: 0 – 65535