Snvsrpvirrtrrxnumofip mismatchcnts, Snvsrpvirrtrrxipmismat chcnts, Snvsrpvirrtrrxhellointm ismatchcnts – Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) User Manual
Page 464: Snvsrpvirrtrrxpriorityze rofrommastercnts, Snvsrpvirrtrrxhigherpri oritycnts, Snvsrpvirrtrtranstomas terstatecnts, Snvsrpvirrtrtranstobac kupstatecnts, Snvsrpvirrtrcurrdeadint

436
Unified IP MIB Reference
53-1002549-02
VSRP virtual router table
snVsrpVirRtrRxNumOfIp
MismatchCnts
brcdIp.1.1.3.21.3.1.1.24
Syntax: Counter32
NOTE: This object is
supported on the
Brocade NetIron
devices.
Read-only
Shows the received number of mismatched IP addresses for VSRP.
snVsrpVirRtrRxIpMismat
chCnts
brcdIp.1.1.3.21.3.1.1.25
Syntax: Counter32
NOTE: This object is
supported on the
Brocade NetIron
devices.
Read-only
Shows the number of received VSRP IP addresses that are
mismatched.
snVsrpVirRtrRxHelloIntM
ismatchCnts
brcdIp.1.1.3.21.3.1.1.26
Syntax: Counter32
NOTE: This object is
supported on the
Brocade NetIron
devices.
Read-only
Shows the number of the virtual router interfaces with hello intervals
that are mismatched.
snVsrpVirRtrRxPriorityZe
roFromMasterCnts
brcdIp.1.1.3.21.3.1.1.27
Syntax: Counter32
NOTE: This object is
supported on the
Brocade NetIron
devices.
Read-only
Shows the number of advertisements with priority of zero received
from the master.
snVsrpVirRtrRxHigherPri
orityCnts
brcdIp.1.1.3.21.3.1.1.28
Syntax: Counter32
Read-only
The counts of the virtual router interfaces with higher priority.
snVsrpVirRtrTransToMas
terStateCnts
brcdIp.1.1.3.21.3.1.1.29
Syntax: Counter32
Read-only
Shows the number of times this interface has changed from the
master state to the backup state for the VRID.
snVsrpVirRtrTransToBac
kupStateCnts
brcdIp.1.1.3.21.3.1.1.30
Syntax: Counter32
Read-only
Shows the number of times this interface has changed from the
master state to the backup state.
snVsrpVirRtrCurrDeadInt
brcdIp.1.1.3.21.3.1.1.31
Syntax: Integer32
Read-only
Shows the current dead intervals in increments of 100 milliseconds for
the virtual router. This is the time period that a backup waits for a hello
message from the master before determining that the master is no
longer active. If the master does not send a hello message before the
dead interval expires and the backups negotiate (compare priorities) to
select a new master.
Name, OID, and syntax
Access
Description