Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 406)

378 Unified IP MIB Reference
53-1002549-02
TM unicast VOQ statistics table
brcdTMUcastQStatsPriority
brcdIp.1.14.2.2.3.1.4
Syntax: PriorityTC None Shows the priority of the packets that will be stored in
this queue. This is a 1-based index. When the
tm-max-queues is set to 4, two consecutive priorities
are stored in one unicast queue. In this case, the valid
values for this index are 1, 3, 5, and 7.
brcdTMUcastQStatsDescription
brcdIp.1.14.2.2.3.1.5
Syntax: DisplayString Read-only This object gives the range of ports serviced by
brcdTMUcastQStatsTMDeviceId and priorities serviced
by this queue.
brcdTMUcastQStatsEnquePkts
brcdIp.1.14.2.2.3.1.6
Syntax: Counter64 Read-only Shows the count of all packets entering ingress queues
on the TM.
brcdTMUcastQStatsEnqueBytes
brcdIp.1.14.2.2.3.1.7
Syntax: Counter64 Read-only Shows the count of all bytes entering ingress queues on
the TM.
brcdTMUcastQStatsDequePkts
brcdIp.1.14.2.2.3.1.8
Syntax: Counter64 Read-only Shows the count of all packets dequeued from ingress
queues and forwarded to the TM.
brcdTMUcastQStatsDequeBytes
brcdIp.1.14.2.2.3.1.9
Syntax: Counter64 Read-only Shows the count of all bytes dequeued from ingress
queues and forwarded to the TM.
brcdTMUcastQStatsDiscardPkts
brcdIp.1.14.2.2.3.1.10
Syntax: Counter64 Read-only Shows the count of all packets failing to enter ingress
queues on the TM. This may be due to the following
reasons:
•
The queue reaches its maximum depth, WRED, or
other reasons.
•
The Network Processor drops the packets due to
an unknown Layer 3 route, RPF, or segment
filtering.
brcdTMUcastQStatsTotalQDiscardBytes
brcdIp.1.14.2.2.3.1.11
Syntax: Counter64 Read-only Shows the count of all bytes failing to enter ingress
queues on the TM. This may be due to the following
reasons:
•
The queue reaches its maximum depth, WRED, or
other reasons.
•
The Network Processor drops the packets due to
an unknown Layer 3 route, RPF, or segment
filtering.
brcdTMUcastQStatsTotalQOldestDiscard
Pkts
brcdIp.1.14.2.2.3.1.12
Syntax: Counter64 Read-only Shows the count of all packets entering ingress queues
on the Traffic Manager, but deleted later due to the
buffer being full.
brcdTMUcastQStatsOldestDiscardBytes
brcdIp.1.14.2.2.3.1.13
Syntax: Counter64 Read-only Shows the count of all bytes entering ingress queues on
the TM, but deleted later due to the buffer being full.
brcdTMUcastQStatsWREDDroppedPkts
brcdIp.1.14.2.2.3.1.14
Syntax: Counter64 Read-only Shows the count of all packets entering ingress queues
on the TM but dropped due to WRED.
Name, OID, and syntax Access Description