Snswportentrysize, Snfdbstationentrysize, Snportstpentrysize – Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) User Manual
Page 215: Snswenablebridgenewroot trap, Snswenablebridgetopocha ngetrap, Snswenablelockedaddrviol ationtrap
Unified IP MIB Reference
187
53-1002549-02
Switch group configuration
snSwPortEntrySize
brcdIp.1.1.3.1.22
Syntax: Integer32
NOTE: This object is not
supported on the
Brocade MLXe
router, Brocade
NetIron MLX,
Brocade NetIron
XMR, Brocade
NetIron CES, and
Brocade NetIron
CER series devices.
Read-only
Specifies the size of each port table entry.
snFdbStationEntrySize
brcdIp.1.1.3.1.23
Syntax: Integer32
NOTE: This object is not
supported on the
Brocade MLXe
router, Brocade
NetIron MLX,
Brocade NetIron
XMR, Brocade
NetIron CES, and
Brocade NetIron
CER series devices.
Read-only
Specifies the size of each FDB station table entry.
snPortStpEntrySize
brcdIp.1.1.3.1.24
Syntax: Integer32
NOTE: This object is not
supported on the
Brocade MLXe
router, Brocade
NetIron MLX,
Brocade NetIron
XMR, Brocade
NetIron CES, and
Brocade NetIron
CER series devices.
Read-only
Specifies the size of each port STP table entry.
snSwEnableBridgeNewRoot
Trap
brcdIp.1.1.3.1.25
Syntax: Integer
Read-write Indicates whether the SNMP agent process is permitted to generate
bridge new root traps.
snSwEnableBridgeTopoCha
ngeTrap
brcdIp.1.1.3.1.26
Syntax: Integer
Read-write Indicates whether the SNMP agent process is permitted to generate
bridge topology change traps.
snSwEnableLockedAddrViol
ationTrap
brcdIp.1.1.3.1.27
Syntax: Integer
Read-write Indicates whether the SNMP agent process is permitted to generate
locked address violation traps.
Name, OID, and syntax
Access
Description