Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 751)

Unified IP MIB Reference 723
53-1002549-02
General traps for the Brocade NetIron devices
snMplsLspDown
brcdIp.0.1011 mplsLspName,
mplsLspPathName Informational The specified LSP is down, because the
current active path specified by the
mplsLSPPathName went down.
NOTE: Do not use this trap if you are using
the snTrapTMLogging traps.
Sample trap message:
Name of the notification
received: snMplsLspDown
Foundry-MPLS-MIB:mplsLspName.2
.1 : (mlx8tobottomcer)
Syntax:
SNMPv2-TC:DisplayString,
Instance IDs: (2 1)
Foundry-MPLS-MIB:mplsLspPathNa
me.2.1 : () Syntax:
SNMPv2-TC:DisplayString,
Instance IDs: (2 1)
snMplsLspChange
brcdIp.0.1012 mplsLspName,
mplsLspPathName Informational The specified LSP has switched traffic to the
new active path ”toLspPath”. The LSP
maintains an up state before and after the
switchover.
NOTE: Do not use this trap if you are using
the snTrapTMLogging traps.
Sample trap message:
Name of the notification
received: snMplsLspChange
Foundry-MPLS-MIB:mplsLspName.2
.1 : (mlx8tobottomcer)
Syntax:
SNMPv2-TC:DisplayString,
Instance IDs: (2 1)
Foundry-MPLS-MIB:mplsLspPathNa
me.2.1 : (testpath1) Syntax:
SNMPv2-TC:DisplayString,
Instance IDs: (2 1)
snTrapChassisFanSpeedLo
w
brcdIp.0.1200 snAgGblTrapMessage Informational The speed of all chassis fans changed to
low.
Sample trap message:
System: Set fan speed to LOW
(50%%)
snTrapChassisFanSpeedM
edium
brcdIp.0.1201 snAgGblTrapMessage Informational The speed of all chassis fans changed to
medium.
Sample trap message:
System: Set fan speed to MED
(75%%)
snTrapChassisFanSpeedM
edHigh
brcdIp.0.1202 snAgGblTrapMessage Informational The speed of all chassis fans changed to
medium high.
Sample trap message:
System: Set fan speed to MED-HI
(90%%)
Trap name and number Varbinds Severity Description and trap message