Brcdvplsendptvlanextstatsroutedoutp kts, Syntax: counter64, Brcdvplsendptvlanextstatsroutedinoc tets – Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) User Manual
Page 339: Brcdvplsendptvlanextstatsroutedout octets, Brcdvplsendptvlanextstatsswitchedin pkts, Brcdvplsendptvlanextstatsswitchedin octets, Brcdvplsendptvlanextstatsswitchedou toctets, Brcdvllendptvlanextstatspriorityid, Brcdvllendptvlanextstatsinpkts, Brcdvllendptvlanextstatsoutpkts
Unified IP MIB Reference
311
53-1002549-02
VLAN extended statistics
VLAN extended statistics for VLL and VLL-local endpoints
The following table contains information for the extended VLAN accounting that applies to the
Virtual Leased Line (VLL) and VLL-local endpoints attached to the Customer Edge (CE) device.
brcdVplsEndptVlanExtStatsRoutedOutP
kts
brcdlp.1.2.15.2.2.4.1.7
Syntax: Counter64
Read-only
The number of valid routed frames transmitted by the
endpoint to the CE.
brcdVplsEndptVlanExtStatsRoutedInOc
tets
brcdlp.1.2.15.2.2.4.1.8
Syntax: Counter64
Read-only
The routed bytes count received by the endpoint from
the CE.
brcdVplsEndptVlanExtStatsRoutedOut
Octets
brcdlp.1.2.15.2.2.4.1.9
Syntax: Counter64
Read-only
The routed bytes count transmitted by the endpoint to
the CE.
brcdVplsEndptVlanExtStatsSwitchedIn
Pkts
brcdlp.1.2.15.2.2.4.1.10
Syntax: Counter64
Read-only
The number of valid switched frames received by the
endpoint from the CE.
brcdVplsEndptVlanExtStatsSwitchedOu
tPkts
brcdlp.1.2.15.2.2.4.1.11
Syntax: Counter64
Read-only
The number of valid switched frames transmitted by
the endpoint to the CE.
brcdVplsEndptVlanExtStatsSwitchedIn
Octets
brcdlp.1.2.15.2.2.4.1.12
Syntax: Counter64
Read-only
The switched bytes count received by the endpoint
from the CE.
brcdVplsEndptVlanExtStatsSwitchedOu
tOctets
brcdlp.1.2.15.2.2.4.1.13
Syntax: Counter64
Read-only
The switched bytes count transmitted by the endpoint
to the CE.
Name, OID, and syntax
Access
Description
brcdVllEndptVlanExtStatsTable
brcdlp.1.2.15.2.1.2
None
This table contains the VLAN extended statistics for
VLL endpoints. For more infromation, refer to
brcdVllEndptVlanExtStatsPriorityId
brcdlp.1.2.15.2.1.2.1.1
Syntax: PortPriorityTC
None
Identifies the port QoS priority. The values 1 through 8
internally map to priorities 0 through 7. The value 128
indicates that the priority-level accounting is not
enabled.
brcdVllEndptVlanExtStatsInPkts
brcdlp.1.2.15.2.1.2.1.2
Syntax: Counter64
Read-only
The number of valid frames received by this endpoint
from the Customer Edge (CE).
brcdVllEndptVlanExtStatsOutPkts
brcdlp.1.2.15.2.1.2.1.3
Syntax: Counter64
Read-only
The number of valid frames transmitted by this
endpoint to the Customer Edge (CE).
Name, OID, and syntax
Access
Description