Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 511)

Unified IP MIB Reference 483
53-1002549-02
BGP4 community filter table
Name, OID, and syntax Access Description
snBgp4CommunityFilterTable
brcdIp.1.2.11.5.1 None The BGP4 community filter table.
snBgp4CommunityFilterIndex
brcdIp.1.2.11.5.1.1.1
Syntax: Integer32 Read-only The table index for a filter entry.
snBgp4CommunityFilterAction
brcdIp.1.2.11.5.1.1.2
Syntax: Integer Read-write Specifies what the device will do if the BGP address
matches this filter:
•
deny(0)
•
permit(1)
snBgp4CommunityFilterCommNum
brcdIp.1.2.11.5.1.1.3
Syntax: OCTET STRING Read-write Identifies the filter’s number. This is a number from 1
through 0xFFFFFFFF. There can be up to 20 filters. Each
integer is represented by four octets.
snBgp4CommunityFilterInternet
brcdIp.1.2.11.5.1.1.4
Syntax: Integer Read-write Indicates if Internet Community is enabled:
•
disabled(0)
•
enabled(1)
snBgp4CommunityFilterNoAdvertise
brcdIp.1.2.11.5.1.1.5
Syntax: Integer Read-write Checks the route to see if it has the keyword
“NO_ADVERTISE”.
If the route has the keyword, it will not
be advertised to EBGP peers:
•
false(0)
•
true(1)
snBgp4CommunityFilterNoExport
brcdIp.1.2.11.5.1.1.6
Syntax: Integer Read-write Checks the route to see if it has the keyword
“NO_EXPORT”.
If the route has the keyword, it will not be
advertised to EBGP peers outside the local AS:
•
false(0)
•
true(1)
snBgp4CommunityFilterRowStatus
brcdIp.1.2.11.5.1.1.7
Syntax: Integer Read-write Controls the management of the table rows. The following
values can be written:
•
delete(3) – Deletes the row.
•
create(4) – Creates a new row.
•
modify(5) – Modifies an existing row.
If the row exists, then a SET with a value of create(4)
returns a "bad value" error. Deleted rows are removed from
the table immediately.
The following values can be returned on reads:
•
noSuch(0) – No such row.
•
invalid(1) – Row is inoperative.
•
valid(2) – Row exists and is valid.
snBgp4CommunityFilterLocalAs
brcdIp.1.2.11.5.1.1.8
Syntax: Integer Read-write Checks the route to see if it has the keyword “LOCAL_AS”. If
the route has the keyword, the community applies only to
confederations. The device will advertises the route only
within the sub-AS:
•
false(0)
•
true(1)