Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 517)

Unified IP MIB Reference 489
53-1002549-02
BGP4 neighbor route map table
BGP4 neighbor route map table
A route map can be one of the parameters to be advertised by the BGP4 network. The Layer 3
Switch can use the route map to set or change BGP4 attributes when creating a local BGP4 route.
NOTE
The following table is not supported on the Brocade MLXe router, Brocade NetIron MLX, Brocade
NetIron XMR, Brocade NetIron CES, and Brocade NetIron CER series devices.
snBgp4NeighFilterGroupInFilterList
brcdIp.1.2.11.8.1.1.5
Syntax: OCTET STRING Read-write Identifies the filter list that is being used to filter incoming
routes from a neighbor group.
This is a number from 1 through 0xFFFF. The incoming and
outgoing list can have a mximum of 16 entries each. This
integer is represented by two octets.
snBgp4NeighFilterGroupOutFilterList
brcdIp.1.2.11.8.1.1.6
Syntax: OCTET STRING Read-write Identifies the filter list that is being used to filter outgoing
routes from a neighbor group.
This is a number from 1 through 0xFFFF. The incoming and
outgoing list can have a mximum of 16 entries each. This
integer is represented by two octets.
snBgp4NeighFilterGroupInAsPathAc
cessList
brcdIp.1.2.11.8.1.1.7
Syntax: OCTET STRING Read-write Identifies the AS-Path list that is being used to filter
incoming routes from a neighbor group.
This is a number from 1 through 0xFFFF. The incoming and
outgoing list can have a mximum of 16 entries each. This
integer is represented by two octets.
snBgp4NeighFilterGroupOutAsPathA
ccessList
brcdIp.1.2.11.8.1.1.8
Syntax: OCTET STRING Read-write Identifies the AS-Path list that is being used to filter
outgoing routes from a neighbor group.
This is a number from 1 through 0xFFFF. The incoming and
outgoing list can have a mximum of 16 entries each. This
integer is represented by two octets.
snBgp4NeighFilterGroupWeight
brcdIp.1.2.11.8.1.1.9
Syntax: Integer Read-write Assigns a weight to a neighbor filter.
Valid values: 0 – 65535
snBgp4NeighFilterGroupWeightAcce
ssList
brcdIp.1.2.11.8.1.1.10
Syntax: OCTET STRING Read-write This is a number from 1 through 0xFFFF. The incoming and
outgoing list can have a mximum of 16 entries each. This
integer is represented by two octets.
Name, OID, and syntax Access Description
Name, OID, and syntax Access Description
snBgp4NeighRouteMapTable
brcdIp.1.2.11.9.1 None The BGP4 neighbor route map table.
snBgp4NeighRouteMapNeighIp
brcdIp.1.2.11.9.1.1.1
Syntax: IpAddress Read-only Shows the IP address for a neighbor entry.
snBgp4NeighRouteMapDir
brcdIp.1.2.11.9.1.1.2
Syntax: Integer Read-only Indicates the direction of the advertisement to which the
access list is applied:
•
out(0)
•
in(1)