Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 499)

Unified IP MIB Reference 471
53-1002549-02
BGP4 general variables
snBgp4GenFastExternalFallover
brcdIp.1.2.11.1.5
Syntax: Integer
NOTE: This object is not supported
on the Brocade MLXe router,
Brocade NetIron MLX,
Brocade NetIron XMR,
Brocade NetIron CES, and
Brocade NetIron CER series
devices.
Read-write Indicates whether or not automatic resetting of BGP sessions
of any directly adjacent sessions is enabled, if the links used
to reach them go down:
•
disabled(0)
•
enabled(1)
snBgp4GenNextBootNeighbors
brcdIp.1.2.11.1.6
Syntax: Integer32
NOTE: This object is not supported
on the Brocade MLXe router,
Brocade NetIron MLX,
Brocade NetIron XMR,
Brocade NetIron CES, and
Brocade NetIron CER series
devices.
Read-write The next boot-configured number of neighbors in a BGP peer
group. The minimum value of this object is the value of the
“snBgp4GenMinNeighbors” object. Its maximum value is the
value of the “snBgp4GenMaxNeighbors” object.
snBgp4GenNextBootRoutes
brcdIp.1.2.11.1.7
Syntax: Integer32
NOTE: This object is not supported
on the Brocade MLXe router,
Brocade NetIron MLX,
Brocade NetIron XMR,
Brocade NetIron CES, and
Brocade NetIron CER series
devices.
Read-write The next boot-configured number of routes. The minimum
value of this MIB is
“snBgp4GenMinRoutes” . The maximum
value of this MIB is “snBgp4GenMaxRoutes” .
snBgp4GenSynchronization
brcdIp.1.2.11.1.8
Syntax: Integer
NOTE: This object is not supported
on the Brocade MLXe router,
Brocade NetIron MLX,
Brocade NetIron XMR,
Brocade NetIron CES, and
Brocade NetIron CER series
devices.
Read-write Enables or disables the synchronization between BGP and
your IGP:
•
disabled(0)
•
enabled(1)
snBgp4GenKeepAliveTime
brcdIp.1.2.11.1.9
Syntax: Integer
NOTE: This object is not supported
on the Brocade MLXe router,
Brocade NetIron MLX,
Brocade NetIron XMR,
Brocade NetIron CES, and
Brocade NetIron CER series
devices.
Read-write Indicates how often the device sends keepalive messages.
Valid values: 1 – 65535 seconds
Default: 60 seconds
Name, OID, and syntax Access Description