Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 413)

Unified IP MIB Reference 385
53-1002549-02
TM CPU VOQ information table
TM CPU VOQ information table
The Traffic Manager CPU VOQ information table is used for profiling the CPU queue size and credit
count at regular intervals. It is advised for the SNMP manager to request the complete row in a
single GET or GET-NEXT request for profiling.
NOTE
The following table displays information about the TM CPU queue on the NI-MLX-1Gx48-T,
NI-MLX-1Gx24, NI-MLX-10Gx8, BR-MLX-100Gx2, and all the POS modules.
Name, OID, and syntax Access Description
brcdTMCpuQInfoTable
brcdIp.1.14.2.2.7 None The Traffic Manager CPU VOQ information table.
brcdTMCpuQInfoSlotId
brcdIp.1.14.2.2.7.1.1
Syntax: Unsigned32 None Shows the slot ID of the LP module that uniquely
identifies a line card. The LP module must be physically
present and operationally up.
brcdTMCpuQInfoTMDeviceId
brcdIp.1.14.2.2.7.1.2
Syntax: Unsigned32 None Shows the TM device ID that uniquely identifies the
Network Processor TM within a line card in the system.
brcdTMCpuQInfoPriority0QSize
brcdIp.1.14.2.2.7.1.3
Syntax: Unsigned32 Read-only Shows the size of the CPU queue for the priority 0.
brcdTMCpuQInfoPriority0CreditCount
brcdIp.1.14.2.2.7.1.4
Syntax: Unsigned32 Read-only Shows the credit count of the CPU queue for the priority
0.
brcdTMCpuQInfoPriority1QSize
brcdIp.1.14.2.2.7.1.5
Syntax: Unsigned32 Read-only Shows the size of the CPU queue for the priority1.
brcdTMCpuQInfoPriority1CreditCount
brcdIp.1.14.2.2.7.1.6
Syntax: Unsigned32 Read-only Shows the credit count of the CPU queue for the
priority1.
brcdTMCpuQInfoPriority2QSize
brcdIp.1.14.2.2.7.1.7
Syntax: Unsigned32 Read-only Shows the size of the CPU queue for the priority2.
brcdTMCpuQInfoPriority2CreditCount
brcdIp.1.14.2.2.7.1.8
Syntax: Unsigned32 Read-only Shows the credit count of the CPU queue for the
priority2.
brcdTMCpuQInfoPriority3QSize
brcdIp.1.14.2.2.7.1.9
Syntax: Unsigned32 Read-only Shows the size of the CPU queue for the priority3.
brcdTMCpuQInfoPriority3CreditCount
brcdIp.1.14.2.2.7.1.10
Syntax: Unsigned32 Read-only Shows the credit count of the CPU queue for the
priority3.
brcdTMCpuQInfoPriority4QSize
brcdIp.1.14.2.2.7.1.11
Syntax: Unsigned32 Read-only Shows the size of the CPU queue for the priority4.