Mef service oam notifications, Vrrp traps, Sntrapvrrpifstatechange – Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) User Manual
Page 721: Fsrp traps, Sntrapfsrpifstatechange

Unified IP MIB Reference
693
53-1002549-02
Proprietary traps
MEF Service OAM notifications
The following are the Metro Ethernet Forum (MEF) Service OAM (SOAM) traps.
NOTE
The following traps are supported on the Brocade NetIron MLX, Brocade MLXe, Brocade NetIron
XMR, Brocade NetIron CES, and Brocade NetIron CER series devices.
VRRP traps
The following table contains VRRP trap that can be used only by the devices that support VRRP.
FSRP traps
The following traps can be used by the devices that support FSRP.
Trap name and
number
Supported?
Varbind
Description
mefSoamDmSe
ssionStartStop
1.3.6.1.4.1.150
07.1.3.0.3
Yes
mefSoamDmCfgSession
Status,
mefSoamNotificationDa
teAndTime
Generated when the state of the delay measurement
(DM) session changes.
The notification is sent when the DM session is started
and stopped.
Sample trap message:
DOT1AG: The CFM session started for MA
index 1, MD index 1, MEP id 1
mefSoamDmThr
esholdCrossing
1.3.6.1.4.1.150
07.1.3.0.5
Yes
mefSoamThresholdNotif
icationId,
mefSoamThresholdNotif
icationCfg,
mefSoamThresholdNotif
icationCount,
mefSoamThresholdSus
pect,
mefSoamNotificationDa
teAndTime
Generated when the value of the crossing object from
the mefSoamDmThresholdTable (as indicated by the
mefSoamThresholdNotificationId) is exceeded during
the current measurement interval.
The notification is sent when the threshold crosses as
per mefSoamDmThresholdCrossing.
Sample trap message:
DOT1AG: The CFM session for MA index 1,
MD index 1, MEP id 1 has crossed the
maximum threshold value
Trap name and number
Varbinds
Severity
Description and trap message
snTrapVrrpIfStateChange
brcdIp.0.34
snAgGblTrapMessage Warning
A VRRP routing device changed state from
master to backup or vice versa.
Sample trap message:
VRRP intf state changed, intf
Trap name and number
Varbinds
Severity
Description and trap message
snTrapFsrpIfStateChange
brcdIp.0.33
snAgGblTrapMessage Informational
An FSRP routing device changed state from
active to standby or vice versa.
Sample trap message:
SRP_FSRP intf state changed,
intf