Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 304)

276 Unified IP MIB Reference
53-1002549-02
NP statistics table
brcdNPStatsTxMulticastPkts
brcdIp.1.14.2.1.1.35
Syntax: Counter 64 Read-only Shows the number of multicast packets transmitted.
brcdNPStatsTxReceiveFromTM
brcdIp.1.14.2.1.1.36
Syntax: Counter 64 Read-only Shows the number of packets received from the Traffic
Manager (TM).
brcdNPStatsTxACLDrop
brcdIp.1.14.2.1.1.37
Syntax: Counter 64 Read-only Shows the number of packets dropped by the outbound
ACL logic.
brcdNPStatsTxPFCMulticastDrop
brcdIp.1.14.2.1.1.38
Syntax: Counter 64 Read-only Shows the total number of multicast FID packets that
have been dropped by egress logic that map to the
egress queue that is in the paused state.
NOTE: This object is supported only on the
NI-MLX-10Gx8-D 8-port 10GbE module and the
NI-MLX-10Gx8-M 8-port 10GbE (M) module.
Zero is returned for the other cards.
brcdNPStatsTxPFCMTUExceedDrop
brcdIp.1.14.2.1.1.39
Syntax: Counter 64 Read-only Shows the total number of packets dropped by egress
logic that exceed the MTU of the egress queue.
NOTE: This object is supported only on the
NI-MLX-10Gx8-D 8-port 10GbE module and the
NI-MLX-10Gx8-M 8-port 10GbE (M) module.
Zero is returned for the other cards.
brcdNPStatsTxPFCQMAPErrorDrop
brcdIp.1.14.2.1.1.40
Syntax: Counter 64 Read-only Shows the number of packets dropped by egress logic
that do not match with any valid egress queue.
NOTE: This object is supported only on the
NI-MLX-10Gx8-D 8-port 10GbE module and the
NI-MLX-10Gx8-M 8-port 10GbE (M) module.
Zero is returned for the other cards.
brcdNPStatsTxIPv4Pkts
brcdIp.1.14.2.1.1.41
Syntax: Counter 64 Read-only Shows the number of IPv4 packets transmitted from
the port. The packets have IPv4 Etype (0x0800) and IP
version (0x4).
brcdNPStatsTxIPv6Pkts
brcdIp.1.14.2.1.1.42
Syntax: Counter 64 Read-only Shows the number of IPv6 packets transmitted from
the port. The packets have IPv6 Etype (0x86DD) and IP
version (0x6).
brcdNPStatsTxIPv4Bytes
brcdIp.1.14.2.1.1.43
Syntax: Counter 64 Read-only Shows the number of packet bytes (+FCS) that have
IPv4 EType (0x0800) and IP version (0x4).
brcdNPStatsTxIPv6Bytes
brcdIp.1.14.2.1.1.44
Syntax: Counter 64 Read-only Shows the number of packet bytes (+FCS) that have
IPv6 EType (0x86DD) and IP version (0x6).
Name, OID, and syntax Access Description