Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 243)

Unified IP MIB Reference 215
53-1002549-02
Chapter
10
CAM Statistics
In this chapter
• IP CAM statistics table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215
• CAM statistics table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216
• CAM profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218
• CAM usage for Layer 3 traffic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218
• CAM usage for Layer 2 traffic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219
• CAM usage session table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220
• CAM usage other table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221
IP CAM statistics table
The following table lists the CAM statistics for Layer 3. The objects in the table are the output for
the dm cam-stat ip
command.
NOTE
The following table is not supported on the Brocade MLXe router, Brocade NetIron MLX, Brocade
NetIron XMR, Brocade NetIron CES, and Brocade NetIron CER series devices.
The output provides the following information:
• L3 L3 1 - 2047 (0x00001 - 0x007ff), free 2047 (0x007ff)
• L3 L2 2048 - 4095 (0x00800 - 0x00fff), free 2048 (0x00800)
Name, OID, and syntax Access Description
snCAMIpStatTable
brcdIp.1.1.2.12.2 None IP CAM statistics table.
snCAMIpStatIfIndex
brcdIp.1.1.2.12.2.1.1
Syntax: Unsigned32 Read-only The ifIndex value of the local interface.
snCAMIpStatLevel
brcdIp.1.1.2.12.2.1.2
Syntax: Unsigned32 Read-only The level of CAM entry for that interface.
snCAMIpStatFreeEntries
brcdIp.1.1.2.12.2.1.3
Syntax: Unsigned32 Read-only Free entries in the IP CAM for that interface and level.
snCAMIpStatTotalEntries
brcdIp.1.1.2.12.2.1.4
Syntax: Unsigned32 Read-only Total entries in the IP CAM for that interface and level.