Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 568)

540 Unified IP MIB Reference
53-1002549-02
IP RIP redistribution table
IP RIP redistribution table
The IP RIP redistribution table contains routes where RIP routes are redistributed. RIP can
redistribute routes from other routing protocols such as OSPF and BGP4 into RIP. A redistributed
route means that a Layer 3 Switch learns through another protocol, and then distributes into RIP.
Name, OID, and syntax Access Description
snRtIpRipRedisTable
brcdIp.1.2.3.3 None The IP RIP redistribution table.
snRtIpRipRedisIndex
brcdIp.1.2.3.3.1.1
Syntax: Integer Read-only The table index for a IP RIP redistribution entry. There can be up to 64
entries in this table.
snRtIpRipRedisAction
brcdIp.1.2.3.3.1.2
Syntax: Integer
NOTE: This object is not
supported on the
Brocade MLXe
router, Brocade
NetIron MLX,
Brocade NetIron
XMR, Brocade
NetIron CES, and
Brocade NetIron
CER series devices.
Read-write Indicates what to do if routes match this IP RIP redistribution entry.
•
deny(0)
•
permit(1)
snRtIpRipRedisProtocol
brcdIp.1.2.3.3.1.3
Syntax: Integer Read-write Indicates which protocol is to be distributed:
•
other(1) – Cannot be used for SNMP-SET.
•
all(2)
•
static(3)
•
ospf(4)
•
bgp(5)
•
isis(6)
snRtIpRipRedisIp
brcdIp.1.2.3.3.1.4
Syntax: IpAddress
NOTE: This object is not
supported on the
Brocade MLXe
router, Brocade
NetIron MLX,
Brocade NetIron
XMR, Brocade
NetIron CES, and
Brocade NetIron
CER series devices.
Read-write Shows the IP address of the IP route to be distributed. The address
0.0.0.0 means that all routes will be distributed.