Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 205)

Unified IP MIB Reference 177
53-1002549-02
System CPU utilization table
System CPU utilization table
The objects in the following table are not supported on the Brocade MLXe, Brocade NetIron MLX,
Brocade NetIron XMR, Brocade NetIron CES, and Brocade NetIron CER series devices. The objects
are supported on the FastIron devices.
snAgentRedunBkupCop
yBootCode
brcdIp.1.1.2.10.1.3
Syntax: Integer Read-write If enabled, the backup management module copies the boot code of the
active management module to its boot code flash storage after power
up, and whenever the active management module’s boot code is
updated. The backup management module does not copy the boot code
it is identical to what is already in flash storage:
•
disabled(0)
•
enabled(1)
Default: disabled(0)
snAgentEnableMgmtM
odRedunStateChangeTr
ap
brcdIp.1.1.2.10.1.4
Syntax: Integer Read-write Indicates if the SNMP agent process has been enabled to generate
management module redundancy state change traps:
•
disabled(0)
•
enabled(1)
Default: enabled(1)
snAgentRedunBkupBoo
tLoad
brcdIp.1.1.2.10.1.5
Syntax: Integer Read-write Downloads a new boot code from boot flash storage of the active
management module to the backup management module.
In a set operation, enter the value downloadBackup(20) to download
the boot code from the active management module to the backup
management module. A set operation is rejected during a download
until an error or normal state is reached.
One of the following values is returned by a get operation:
•
normal(1) – No operation.
•
operationError(17) – Error codes.
•
downloadBackup(20) – Download boot code from active module to
backup to the backup module.
snAgentRedunSwitchOv
er
brcdIp.1.1.2.10.1.6
Syntax: Integer Read-write Switches a backup management module to an active management
module:
•
other(1)
•
reset(2) – Resets the backup module to active.
Name, OID, and syntax Access Description
Name, OID, and syntax Access Description
snAgentCpuUtilTable
brcdIp.1.1.2.11.1 None The table to list utilization for all CPUs.
snAgentCpuUtilSlotNu
m
brcdIp.1.1.2.11.1.1.1
Syntax: Integer32 Read-only The slot number of the module that contains the CPU.