Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 519)

Unified IP MIB Reference 491
53-1002549-02
BGP4 redistribution of routes table
BGP4 redistribution of routes table
The BGP4 redistribution of routes table contains configurations that could be imported into the
BGP4 domain. Each entry specifies a particular RIP, OSPF, or static route that will be imported into
the BGP4 domain.
NOTE
The following table is not supported on the Brocade MLXe router, Brocade NetIron MLX, Brocade
NetIron XMR, Brocade NetIron CES, and Brocade NetIron CER series devices.
snBgp4NetworkBackdoor
brcdIp.1.2.11.10.1.1.4
Syntax: Integer Read-write Indicates if the backdoor option is enabled for this network:
•
disabled(0)
•
enabled(1)
The backdoor option changes the administrative distance of the
route to this network from the EBGP administrative distance (20
by default) to the Local BGP weight (200 by default). The route is
tagged as a backdoor route. Use this option when you want the
router to prefer IGP routes such as RIP or OSPF routes over the
EBGP route for the network.
snBgp4NetworkRowStatus
brcdIp.1.2.11.10.1.1.5
Syntax: Integer Controls the management of the table rows. The following values
can be written:
•
delete(3) – Deletes the row.
•
create(4) – Creates a new row.
•
modify(5) – Modifies an existing row.
If the row exists, then a SET with a value of create(4) returns a
"bad value" error. Deleted rows are removed from the table
immediately.
The following values can be returned on reads:
•
noSuch(0) – No such row.
•
invalid(1) – Row is inoperative.
•
valid(2) – Row exists and is valid.
Name, OID, and syntax Access Description
Name, OID, and syntax Access Description
snBgp4RedisTable
brcdIp.1.2.11.11.1 None The BGP4 redistribution of routes table.
snBgp4RedisProtocol
brcdIp.1.2.11.11.1.1.1
Syntax: Integer Read-only Shows the type of route that was imported into the BGP4
domain:
•
rip(1) – RIP
•
ospf(2) – OSPF
•
static(3) – Static
•
connected(4) – Connected
•
isis(5) – IS-IS
snBgp4RedisMetric
brcdIp.1.2.11.11.1.1.2
Syntax: Integer32 Read-write Indicates the metric used.
snBgp4RedisRouteMap
brcdIp.1.2.11.11.1.1.3
Syntax: OCTET STRING Read-write Indicates the name of the route map used.
Each character is represented by one octet.
Valid values: Up to 32 octets