Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 673)

Unified IP MIB Reference 645
53-1002549-02
Virtual server statistics table
snL4VirtualServerStatisticTransmitByte
s
brcdIp.1.1.4.25.1.1.7
Syntax: Counter64 Read-only The number of bytes the switch has sent to the real server
snL4VirtualServerStatisticSymmetricSt
ate
brcdIp.1.1.4.25.1.1.8
Syntax: Integer Read-only Shows which ServerIron is the active one:
•
other(3) – Not the active ServerIron
•
active(5) – Active ServerIron
snL4VirtualServerStatisticSymmetricPr
iority
brcdIp.1.1.4.25.1.1.9
Syntax: Integer Read-only Shows the Symmetric SLB priority configured on the
ServerIron.
snL4VirtualServerStatisticSymmetricK
eep
brcdIp.1.1.4.25.1.1.10
Syntax: Integer Read-only This object is applicable only to the active ServerIrons.
Shows the number of times an symmetric SLB backup has
failed to communicate with the active ServerIron. By
default, the counter is incremented by 1 every 400
milliseconds, if the backup switch is responding slowly to
the active switch’s keepalive message. The counter is reset
to 0 each time the backup switch replies to a keepalive
message. If the counter exceeds the maximum number
allowed (20 by default, thus 8 seconds), the standby switch
takes over as the new active switch. Normally, this field
almost always contains 0.
snL4VirtualServerStatisticSymmetricAc
tivates
brcdIp.1.1.4.25.1.1.11
Syntax: Counter Read-only The number of times this ServerIron has become the active
switch.
snL4VirtualServerStatisticSymmetricIn
actives
brcdIp.1.1.4.25.1.1.12
Syntax: Counter Read-only Shows the number of times this ServerIron has changed
from being the active switch to the backup switch.
snL4VirtualServerStatisticSymmetricB
estStandbyMacAddr
brcdIp.1.1.4.25.1.1.13
Syntax: Physical address Read-only Shows the MAC address of the backup ServerIron with the
second-highest priority. This ServerIron will become the
active switch if a failover occurs.
snL4VirtualServerStatisticSymmetricAc
tiveMacAddr
brcdIp.1.1.4.25.1.1.14
Syntax: Physical address Read-only Shows the MAC address of the active ServerIron with the
highest priority. This ServerIron will become the backup
switch if a failover occurs.
snL4VirtualServerStatisticTrackPortList
brcdIp.1.1.4.25.1.1.15
Syntax: DisplayString Read-only Virtual port track group port list.
snL4VirtualServerStatisticTrackPortSta
te
brcdIp.1.1.4.25.1.1.16
Syntax: Integer Read-only Shows the port track-group state.
Valid values:
•
none(0) - The track-group port list is empty.
•
up(1)
•
suspect(2)
Name, OID, and syntax Access Description