beautypg.com

Lag mib definition, Lag group table, Fdrylinkaggregationgrouptable – Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) User Manual

Page 607: Fdrylinkaggregationgroupname, Fdrylinkaggregationgrouptype, Fdrylinkaggregationgroupadminstatus, Fdrylinkaggregationgroupiflist, Fdrylinkaggregationgroupprimaryport, Chapter 59, Chapter

background image

Unified IP MIB Reference

579

53-1002549-02

Chapter

59

LAG MIB Definition

In this chapter

LAG group table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 579

LAG group port table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 580

LAG group table

The fdryLinkAggregationGroupTable object replaces the snLinkAggregationGroupTable object.

Name, OID, and syntax

Access

Description

fdryLinkAggregationGroupTable
brcdIp.1.1.3.33.1.1

None

The Link Aggregation Group (LAG) table.

fdryLinkAggregationGroupName
brcdIp.1.1.3.33.1.1.1.1
Syntax: DisplayString

None

Displays the name of a LAG.

fdryLinkAggregationGroupType
brcdIp.1.1.3.33.1.1.1.2
Syntax: Integer

Read-create Displays the LAG type.

fdryLinkAggregationGroupAdminStatus
brcdIp.1.1.3.33.1.1.1.3
Syntax: Integer

Read-create Displays the desired deployed state of this LAG entry.

NOTE: This is not the operational status. Refer to ifTable

for the operational status.

deploy(1)—Deploy the LAG and set to LACP active if
a dynamic LAG.

deployPassive(2)—Deploy the LAG and set to LACP
passive if a dynamic LAG.

undeploy(3)—Undeploy the LAG if no more than two
ports are enabled.

undeployForced(4)—Undeploy the LAG regardless of
the number of ports enabled.

NOTE: undeployForced(4) status is a write-only value. In

particular, a row cannot be deployed until the
corresponding instances of
fdryLinkAggregationGroupIfList have been set.

fdryLinkAggregationGroupIfList
brcdIp.1.1.3.33.1.1.1.4
Syntax: OCTET STRING

Read-create Displays a list of interface indices which are the port

memberships of a trunk group. Each interface index is a
32-bit integer in big-endian order.
NOTE: This object accepts a 32-bit integer only.

fdryLinkAggregationGroupPrimaryPort
brcdIp.1.1.3.33.1.1.1.5
Syntax: InterfaceIndex

Read-create DIsplays the primary port for the Link Aggregation Group.

This must be set before deploying the Link Aggregation
Group unless this is a keepalive Link Aggregation Group.