Etherstatsmulticastpkts, Etherstatscrcalignerrors, Etherstatsundersizepkts – Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) User Manual
Page 51: Etherstatsoversizepkts, Etherstatsfragments, Etherstatspkts64octets, Etherstatspkts65to127octets, Etherstatspkts128to255octets, Etherstatspkts256to511octets, Etherstatspkts512to1023octets

Unified IP MIB Reference
23
53-1002549-02
RFC 2932: IPv4 Multicast Routing MIB
RFC 2932: IPv4 Multicast Routing MIB
Support for RFC 2932 is available on the Brocade NetIron MLX, Brocade MLXe, Brocade NetIron
XMR, Brocade NetIron CES, and Brocade NetIron CER series devices.
NOTE
This MIB is not VRF-aware. MIB entries are based on the default VRF IP multicast routing tables.
IP multicast scalar
ipMRouteTable (IP multicast route table)
Use the show ip pim mcache CLI command to display the information for the IP multicast route
table.
Use the show ip route and show ip mroute commands to display the route information
(ipMRouteRtAddress, ipMRouteRtMask, and ipMRouteRtType).
The SET request is not supported for this table.
etherStatsMulticastPkts
Counter32
etherStatsCRCAlignErrors
Counter32
etherStatsUndersizePkts
Counter32
etherStatsOversizePkts
Counter32
etherStatsFragments
Counter32
etherStatsPkts64Octets
Counter32
etherStatsPkts65to127Octets
Counter32
etherStatsPkts128to255Octets
Counter32
etherStatsPkts256to511Octets
Counter32
etherStatsPkts512to1023Octets
Counter32
etherStatsPkts1024to1518Octets
Counter32
etherStatsTable objects
Syntax
Object
Object identifier
Supported?
ipMRouteEnable
1.3.6.1.2.1.83.1.1.1
Yes. Use either the [no] ip multicast-routing or
[no] router pim command to configure IP multicast
routing on the router.
ipMRouteEntryCount
1.3.6.1.2.1.83.1.1.7
Yes. Use the show ip pim mcache [count] command
to display the the number of rows in the
ipMRouteTable.