Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 471)

Unified IP MIB Reference 443
53-1002549-02
IP general group
snRtIpIrdpEnable
brcdIp.1.2.2.1.7
Syntax: Integer Read-write Indicates if router advertisement is enabled on this device:
•
disabled(0)
•
enabled(1)
snRtIpLoadShare
brcdIp.1.2.2.1.8
Syntax: Integer Read-write Indicates if more than one route is enabled to share the loads:
•
disabled(0)
•
enabled(1)
snRtIpProxyArp
brcdIp.1.2.2.1.9
Syntax: Integer Read-write Indicates if the proxy ARP function is enabled:
•
disabled(0)
•
enabled(1)
snRtIpRarp
brcdIp.1.2.2.1.10
Syntax: Integer Read-write Indicates if the RARP server is enabled:
•
disabled(0)
•
enabled(1)
snRtIpTtl
brcdIp.1.2.2.1.11
Syntax: Integer Read-write Indicates the time-to-live (TTL) value that will be used in the IP header of
an IP packet that was generated by this device.
Valid values: 1 – 255
snRtIpSetAllPortConfig
brcdIp.1.2.2.1.12
Syntax: Integer32
NOTE: This object is
not supported
on the Brocade
MLXe router,
Brocade NetIron
MLX, Brocade
NetIron XMR,
Brocade NetIron
CES, and
Brocade NetIron
CER series
devices.
Read-write Shows the index number of a row in “snRtIpPortConfigTable” on
page 451, such as “snRtIpPortConfigPortIndex” on page 451. All the
writeable data from that row will be copied to all appropriate rows in all
IPinterface port configuration table.
NOTE: Prior to setting this object, make sure that the row identified in
this object contains a value for all its objects; otherwise, the
current data of the row will be used to set the entire IP interface
configuration table.
snRtIpFwdCacheMaxEn
tries
brcdIp.1.2.2.1.13
Syntax: Integer32 Read-only Shows the maximum number of entries in the IP forwarding cache table.
snRtIpFwdCacheCurEnt
ries
brcdIp.1.2.2.1.14
Syntax: Integer32 Read-only Shows the current number of entries in the IP forwarding cache table.
snRtIpMaxStaticRouteE
ntries
brcdIp.1.2.2.1.15
Syntax: Integer Read-only Shows the maximum number of entries in the IP static route table.
snRtIpDirBcastFwd
brcdIp.1.2.2.1.16
Syntax: Integer Read-write Indicates if the directed broadcast forwarding feature is enabled:
•
disabled(0)
•
enabled(1)
snRtIpLoadShareNumO
fPaths
brcdIp.1.2.2.1.17
Syntax: Integer32 Read-write Specifies the number of routes to be used to share the load.
Name, OID, and syntax Access Description