Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 255)

Unified IP MIB Reference 227
53-1002549-02
Software licensing
NOTE
The following table is not supported on the Brocade MLXe, Brocade NetIron MLX, Brocade NetIron
XMR, Brocade NetIron CES, Brocade NetIron CER series and on the FastIron devices.
Name, OID, and syntax Access Description
fdryLicenseTable
brcdIp.1.1.2.15.1 None A list of licenses maintained by the license sub-system.
fdryLicensePackageName
brcdIp.1.1.2.15.1.1.1
Syntax: DisplayString None The name of the package, whose license information, this entry
displays.
fdryLicenseLid
brcdIp.1.1.2.15.1.1.2
Syntax: DisplayString None The License ID (LID) of the chassis or the line module for which this
entry displays license information.
fdryLicenseHash
brcdIp.1.1.2.15.1.1.3
Syntax: DisplayString None A unique hash for identifying a license entry in the system. This helps
traverse through the entries with the same package name and LID.
fdryLicenseType
brcdIp.1.1.2.15.1.1.4
Syntax: Integer Read-only The type of the license, which can be either normal or trial.
fdryLicensePrecedence
brcdIp.1.1.2.15.1.1.5
Syntax: Unsigned32 Read-only Defines the priority of a particular trial license among those having
the same package name and LID. This is primarily used for
determining which license to use when there are many trial and
normal licenses with the same package name and LID.
fdryLicenseTrialDays
brcdIp.1.1.2.15.1.1.6
Syntax: Unsigned32 Read-only The number of trial days for the license, if it is a trial license.
Otherwise, the value has no meaning for normal licenses and read
as 0 on a Get operation.
fdryLicenseTrialTimeElapsed
brcdIp.1.1.2.15.1.1.7
Syntax: Unsigned32 Read-only The cumulative number of hours used for this trial license. This
counts all the usages of the trial license. For a normal license, this is
0.
fdryLicenseTrialTimeLeft
brcdIp.1.1.2.15.1.1.8
Syntax: Unsigned32 Read-only The number of hours left for the trial license. This is derived from the
total number of hours and the cumulative number of hours used. For
a normal license, this is 0.
fdryLicenseTrialState
brcdIp.1.1.2.15.1.1.9
Syntax: Integer Read-only This indicates the state of the trial license:
•
Invalid - The license is not valid.
•
Unused - The license is never used.
•
Active - The license has been used at least once.
•
Expired - The license has expired and can no longer be used.
fdryLicenseVendorInfo
brcdIp.1.1.2.15.1.1.10
Syntax: DisplayString Read-only This is the Brocade-specific package data which is an octet string.
This contains encoded information of license-specific information
such as package bit mask, number of ports and so on.
fdryLicenseSlot
brcdIp.1.1.2.15.1.1.11
Syntax: Integer32
NOTE: This object is not
supported on the
Brocade FastIron
devices
Read-only This indicates the slot number of the module to which the license
belongs.
There is a one-to-one mapping between LID and slot number, as
each module has a unique LID and can be present in only one slot.