Traps for tm, Sntraptmloggingstart, Sntraptmloggingstop – Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) User Manual
Page 717: Sntraptmloggingrestart, Sntraptmrecoveryslotres et, Sntraptmegressdataerror, Sntrapsfmlinkdown

Unified IP MIB Reference
689
53-1002549-02
Proprietary traps
Traps for TM
The following table contains Traffic Manager (TM) traps that are supported only on the Brocade
NetIron MLX, Brocade MLXe, Brocade NetIron XMR, Brocade NetIron CES, and Brocade NetIron
CER series devices.
snTrapOpticalMonitoringError
(continued)
OPTICAL MONITORING: port
latched flags(
OPTICAL MONITORING: port
failed
snTrapXfpSfpIncompatibleOptics
brcdIp.0.1009
NOTE: This trap is supported on
the Brocade NetIron MLX,
Brocade MLXe, Brocade
NetIron XMR, Brocade
NetIron CES, and Brocade
NetIron CER series devices.
snAgGblTrapMessage Alerts
The optics are incompatible with the port
configuration.
Trap name and number
Varbinds
Severity
Description and trap message
snTrapTMLoggingStart
brcdIp.0.1015
snAgGblTrapMessage
Informational
TM logging started, triggerred by an event.
snTrapTMLoggingStop
brcdIp.0.1016
snAgGblTrapMessage
Informational
TM logging stopped because the storage is
full.
snTrapTMLoggingRestart
brcdIp.0.1017
snAgGblTrapMessage
Informational
TM logging restarted after the log was
cleared.
snTrapTMRecoverySlotRes
et
brcdIp.0.1019
snAgGblTrapMessage
Informational
This trap is generated when the TM
recovery slot reset is triggered.
snTrapTMEgressDataError
brcdIp.0.1020
snAgGblTrapMessage
Major
This trap is generated when the system
detects egress data errors on the Traffic
Manager.
Sample trap message:
Health Monitoring : TM Egress
data errors detected on LP
snTrapSFMLinkDown
brcdIp.0.1100
snAgGblTrapMessage
Warning
A link from the LP Traffic Manager to an
SFM Fabric Element is down.
Sample trap message:
Fabric Monitoring Link Down :
SFM
LP
Trap name and number
Varbinds
Severity
Description and trap message