Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 470)

442 Unified IP MIB Reference
53-1002549-02
IP general group
IP general group
The following table contains the general objects for the IP group.
Name, OID, and syntax Access Description
snRtClearArpCache
brcdIp.1.2.2.1.1
Syntax: ClearStatus
NOTE: This object is
supported in
the ServerIron
devices.
Read-write Clears learned Address Resolution Protocol (ARP) entries but does not
remove any static ARP entries:
•
normal(0) – Do not clear learned entries.
•
clear(1) – Clear learned entries.
snRtClearIpCache
brcdIp.1.2.2.1.2
Syntax: ClearStatus Read-write Clears the entries in the IP forwarding cache table:
•
normal(0) – Do not clear entries.
•
clear(1) – Clear entries.
snRtClearIpRoute
brcdIp.1.2.2.1.3
Syntax: ClearStatus Read-write Clears the IP route tables:
•
normal(0) – Do not clear entries.
•
clear(1) – Clear entries.
snRtBootpServer
brcdIp.1.2.2.1.4
Syntax: IpAddress
NOTE: This object is
not supported
on the Brocade
MLXe router,
Brocade NetIron
MLX, Brocade
NetIron XMR,
Brocade NetIron
CES, and
Brocade NetIron
CER series
devices.
Read-write Shows the IP address of the bootp server to which bootp packets must
be relayed.
snRtBootpRelayMax
brcdIp.1.2.2.1.5
Syntax: Integer
NOTE: This object is
not supported
on the Brocade
MLXe router,
Brocade NetIron
MLX, Brocade
NetIron XMR,
Brocade NetIron
CES, and
Brocade NetIron
CER series
devices.
Read-write Specifies the maximum number of hops the bootp packet should travel.
Valid values: Up to 15 hops
snRtArpAge
brcdIp.1.2.2.1.6
Syntax: Integer Read-write Specifies the number of minutes that an ARP entry can be valid without
having to be relearned.
Valid values: Up to 240 minutes. A value of zero (0) means that the entry
will not age out.