Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 514)

486 Unified IP MIB Reference
53-1002549-02
BGP4 neighbor distribute group table
BGP4 neighbor distribute group table
NOTE
The following table is not supported on the Brocade MLXe router, Brocade NetIron MLX, Brocade
NetIron XMR, Brocade NetIron CES, and Brocade NetIron CER series devices.
snBgp4NeighGenCfgEbgpMultihop
Ttl
brcdIp.1.2.11.6.1.1.15
Syntax: Integer Read-write Specifies the time-to-live (TTL) for the neighbor.
Valid values: 0 – 255.
Default: 0. If you leave the EBGP TTL value set to 0, the
software uses the IP TTL value.
snBgp4NeighGenCfgShutdown
brcdIp.1.2.11.6.1.1.16
Syntax: Integer Read-write Indicates if BGP4 neighbor shutdown is enabled:
•
disabled(0)
•
enabled(1)
If enabled, the device shuts down the session with this
neighbor. Shutting down the session allows you to
completely configure the neighbor and save the
configuration without actually establishing a session with
the neighbor.
Default: disabled(0)
snBgp4NeighGenCfgKeepAliveTim
e
brcdIp.1.2.11.6.1.1.17
Syntax: Integer Read-write Indicates how often the device sends keep alive messages.
This object overrides the global settings for the Keepalive
Time.
Valid values: 0 – 65535 seconds
snBgp4NeighGenCfgHoldTime
brcdIp.1.2.11.6.1.1.18
Syntax: Integer Read-write Determines how many seconds the device will wait for a
keepalive or update message from a BGP4 neighbor before
deciding that the neighbor is dead.
This object overrides the global settings for Hold Time.
Valid values: 0 or 3 – 65535 seconds (1 and 2 seconds are
not allowed).
If you set the Hold Time to 0, the router waits indefinitely for
messages from a neighbor.
snBgp4NeighGenCfgDefOrigMap
brcdIp.1.2.11.6.1.1.19
Syntax: OCTET STRING Read-write Indicates the name of the default route map. This is an octet
string. Each character is represented by one octet.
Valid values: Up to 32 octets
snBgp4NeighGenCfgDesc
brcdIp.1.2.11.6.1.1.20
Syntax: OCTET STRING Read-write Specifies the name for the neighbor.
Valid values: Up to 80 octets
snBgp4NeighGenCfgPass
brcdIp.1.2.11.6.1.1.21
Syntax: OCTET STRING Read-write Specifies an MD5 password for securing sessions between
the device and its neighbor.
Valid values: Up to 80 octets
Name, OID, and syntax Access Description