Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 204)

176 Unified IP MIB Reference
53-1002549-02
Agent user account table
Agent redundant group
Use the following objects to manage redundant management groups.
NOTE
The upgraded version of MP card MR2 supports all the objects in the Agent redundant group table.
The MP-MR2 is supported only on the Brocade NetIron XMR, Brocade NetIron MLX, and Brocade
MLXe devices.
Name, OID, and syntax Access Description
snAgentUserAccntTable
brcdIp.1.1.2.9.2 None A table of user account information.
snAgentUserAccntName
brcdIp.1.1.2.9.2.1.1
Syntax: DisplayString Read-only Displays the user name.
This object can have up to 48 characters
snAgentUserAccntPassword
brcdIp.1.1.2.9.2.1.2
Syntax: DisplayString Read-write Contains the user password.
Valid values: Up to 48 characters
snAgentUserAccntEncryptCode
brcdIp.1.1.2.9.2.1.3
Syntax: Integer32 Read-write States the password encryption method code.
snAgentUserAccntPrivilege
brcdIp.1.1.2.9.2.1.4
Syntax: Integer32 Read-write Shows the user privilege.
snAgentUserAccntRowStatus
brcdIp.1.1.2.9.2.1.5
Syntax: Integer Read-write Creates, modifies, or deletes a user account table entry:
•
other(1)
•
valid(2)
•
delete(3)
•
create(4)
•
modify(5)
Name, OID, and syntax Access Description
snAgentRedunActiveMg
mtMod
brcdIp.1.1.2.10.1.1
Syntax: Integer32 Read-write Shows the slot number of the active management module. Setting this
object does not take effect immediately. You must save the
configuration data to flash storage, then reboot the system before the
new value takes effect. Setting a value of 0 requests the system to
auto-select an active management module after power up.
Default: 0
snAgentRedunSyncCon
fig
brcdIp.1.1.2.10.1.2
Syntax: Integer32 Read-write Shows how often the data in the active management module will be
copied
to the backup management module. The value for this object is in
seconds.
Setting this object to 0 disables the copy process. Setting it to a
negative value starts the process immediately, but runs only once.
Default: Every 10 seconds