Ip as-path access list string table, Snipaspathaccessliststringt able, Snipaspathaccessliststring name – Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) User Manual
Page 274: Snipaspathaccessliststrings equence, Snipaspathaccessliststringa ction, Snipaspathaccessliststringr egexpression, Snipaspathaccessliststringr owstatus, Ip community list string table, Snipcommunityliststringtable, Snipcommunityliststringname

246
Unified IP MIB Reference
53-1002549-02
IP AS-Path access list string table
IP AS-Path access list string table
AS-Path is a list of the other ASs through which a route passes. BGP4 routers can use the AS-Path
to detect and eliminate routing loops. The IP AS-Path access list string table contains filters that are
used to deny or permit updates received from BGP4 neighbors.
IP community list string table
This table contains the list of community strings used.
Name, OID, and Syntax
Access
Description
snIpAsPathAccessListStringT
able
brcdIp.1.2.2.16
None
IP AS-Path access list string table.
snIpAsPathAccessListString
Name
brcdIp.1.2.2.16.1.1
Syntax: DisplayString
Read-only
An index for the entry in the table.
snIpAsPathAccessListStringS
equence
brcdIp.1.2.2.16.1.2
Syntax: Integer32
Read-only
The sequence index for this entry in this table.
snIpAsPathAccessListStringA
ction
brcdIp.1.2.2.16.1.3
Syntax: Integer
Read-write
Determines what to do with the packet if its address matches this
entry:
•
deny(0)
•
permit(1)
snIpAsPathAccessListStringR
egExpression
brcdIp.1.2.2.16.1.4
Syntax: Integer
Read-write
Specifies the AS-Path information that will be permitted or denied.
This object contains a regular expression. Each character of the
regular expression string is represented by one octet.
snIpAsPathAccessListStringR
owStatus
brcdIp.1.2.2.16.1.5
Syntax: Integer
Read-write
Controls the management of the table rows. The values that can be
written are
•
delete(3) – Deletes the row
•
create(4) – Creates a new row
•
modify(5) – Modifies an existing row
If the row exists, then a SET with a value of create(4) returns a "bad
value" error. Deleted rows are deleted immediately. The following
values can be returned on reads:
•
noSuch(0) – No such row
•
invalid(1) – Row is inoperative
•
valid(2) – Row exists and is valid
Name, OID, and Syntax
Access
Description
snIpCommunityListStringTable
brcdIp.1.2.2.17
None
IP community list string table.
snIpCommunityListStringName
brcdIp.1.2.2.17.1.1
Syntax: OCTET STRING
Read-only
An index for an entry in the table.
This object can have up to 32 octets.