IAI America ERC3 - Manual (Page 41)

Chapter 1 Specifications Check
1.1 Product Check
31
Chapter 1 Specifications Check
1.1 Product Check
1.1.1 Parts
This product is comprised of the following parts if it is of standard configuration.
If you find any fault in the contained model or any missing parts, contact us or our distributor.
(1) ERC3 Main Body
No. Part Name Model Remarks
1 ERC3 Main Body
Refer to “How to read the model plate”,
“How to read the model”.
Accessories
Except for SE
Type
CB-ERC3P-PWBIOƑƑƑ
2
Power Supply
• I/O Cable
SE Type CB-ERC3S-PWBIOƑƑƑ
ƑƑƑ shows the
cable length
(Example)
ƑƑƑ : 020 2 [m]
3 First Step Guide
4 Instruction Manual (DVD)
5 Safety Guide
6 Pulse Converter (Option) AK-04
It is necessary when
pulse control is to be
conducted and host
controller is the
open collector type.
(2) PIO Converter (Option: SE: Serial Communicate Type)
No. Part Name Model Remarks
1 PIO Converter Main Body
Refer to “How to read the model plate”,
“How to read the model”.
Accessories
2 I/O Flat Cable CB-PAC-PIOƑƑƑ
ƑƑƑ shows the
cable length
(Example)
ƑƑƑ : 020 2 [m]
3 Power Connector
FMC1.5/7-ST-3.5
(Supplier : PHOENIX CONTACT)
Recommended
cable size
AWG16 to 18
(1.25 to 0.75mm 2 )
4
Absolute Battery
(For Simple Absolute Type)
AB-7
5 Safety Guide
(3) Quick Teach (Option: SE: Serial Communicate Type (Specially for MEC Mode Type))
No. Part Name Model Remarks
1 Main Body
Refer to “How to read the model plate”,
“How to read the model”.
Accessories
2
2-pin plug connector for
external 24V power input
733-102-CC
(Supplier : WAGO)
Recommended
cable size
AWG20
(0.5mm 2 )
3 2-pin plug connector for EMG FMC1.5/2-ST-3.5
(Supplier : PHOENIX CONTACT)
Recommended
cable size
AWG16 to 24
(0.2 to 1.25mm 2 )
Short-circuited when
delivered
4 Safety Guide