Creating a vlan and its vlan interface, Creating a vlan and its vlan, Interface – H3C Technologies H3C MSR 50 User Manual

Page 79

Step Remarks

Optional.
Configure an IP address and MAC address for a VLAN

interface. Select whether to enable the DHCP server function for
a VLAN interface. If yes, configure the related parameters.
You can also configure the DHCP server function in Advanced >
DHCP Setup. For more information, see "Configuring DHCP." This

chapter only describes the DHCP server configuration in the LAN
Setup module.

Creating a VLAN and its VLAN interface

Select Interface Setup > LAN Interface Setup from the navigation tree. The system goes to the default
page, VLAN Setup page.

Figure 36 VLAN setup page

Table 35 Configuration items

Item Description

VLAN Create And Remove Set the operation type to Create or Remove.

VLAN IDs

Enter the ID of the VLAN (or VLAN interface) to be created or removed. You can
create or remove multiple VLANs at a time.

Create VLAN Interface

Create a VLAN interface when you create a VLAN.

This manual is related to the following products:

H3C MSR 30 H3C MSR 2600 H3C MSR 20-2X[40] H3C MSR 20-1X H3C MSR 930 H3C MSR 900