H3C Technologies H3C MSR 50 - Manual (Page 204)

183
Application control configuration example
Network requirements
As shown in Figure 190 , internal users access the Internet through Router. Configure application control
on Router, so that no user can use MSN.
Figure 190 Network diagram
Configuration procedure
# Load the application control file (assume that signature file p2p_default.mtd, which can prevent using
of MSN, is stored on the device).
• Select Security Setup > Application Control from the navigation tree.
• Select the Load Application tab and perform the following configurations, as shown in Figure 191 .
Figure 191 Loading the application signature file
• Select the From Device option, and select file p2p_default from the list.
• Click Apply. Figure 192 shows the loaded applications.