H3C Technologies H3C MSR 50 - Manual (Page 438)

53
Figure 425 Adding a predefined domain name
4. Configure the predefined domain name as described in Table 177 .
5. Click Apply.
Table 177 Configuration items
Item Description
Domain Name Enter a domain name to be issued to clients.
IP Setting Method
Select the IP setting method, including Dynamic and Static.
• Dynamic: To use this method, you also need to navigate to page Advanced > DNS
Setup > DNS Configuration to configure domain name resolution. The gateway will
first resolve the domain name to get an IP address and then issue the IP address to
clients.
• Static: To use this method, you must specify an IP address in the next field. The
gateway will issue the domain name-IP address mapping to clients.
IP
Specify an IP address for the domain name when the IP setting method is Static.
When the IP setting method is Dynamic, this IP setting does not take effect.
Configuring a resource group
1. Select VPN > SSL VPN > Resource Management > Resource Group from the navigation tree. The
Resource Group page appears.
Figure 426 Resource groups
2. Click Add to enter the page for adding a resource group.