H3C Technologies H3C MSR 50 - Manual (Page 480)

95
Figure 477 Configuring the domain policy
2. Configure a RADIUS scheme named system:
a. Select Advanced > RADIUS from the navigation tree.
b. Click Add to enter the RADIUS scheme configuration page.
c. Enter the scheme name system.
d. In the Common Configuration area, select Extended as the supported RADIUS server type, and
select Without domain name as the username format.
e. Click the Add button in the RADIUS Server Configuration area.
On the page that appears, as shown in
Figure 478 , select Primary Authentication Server as
the server type, select IPv4 and enter IP address 10.153.10.131, enter port number 1812,
enter the key expert, enter expert again to confirm the key, and click Apply.
The RADIUS server is then added to the RADIUS server list of the RADIUS scheme. Now, the
RADIUS scheme configuration page is shown as
Figure 479 .
f. Click Apply.
Figure 478 Adding a RADIUS server for the RADIUS scheme