H3C Technologies H3C MSR 50 - Manual (Page 302)

281
Figure 287 Adding a view named view1
d. Select the Included radio box.
e. Type the MIB subtree OID interfaces.
f. Click Add.
g. Click Apply. A configuration progress dialog box appears, as shown in Figure 288 .
h. After the configuration process is complete, click Close.
Figure 288 Configuration progress dialog box
3. Configure an SNMP group:
a. Click the Group tab and then click Add. Perform the following configuration as shown in Figure
289 .
b. Type group1 in the Group Name field.
c. Select view1 from the Read View list.
d. Select view1 from the Write View list.
e. Select v3 from the Security Level list.
f. Click Apply.