H3C Technologies H3C MSR 50 - Manual (Page 25)

4
User level
Web user levels, from low to high, are visitor, monitor, configure, and management. A higher-level user
has all rights of a lower-level user.
• Visitor—Users of this level can perform the ping and traceroute operations, but can neither access
the device data nor configure the device.
• Monitor—Users of this level can only access the device data but cannot configure the device.
• Configure—Users of this level can access data from the device and configure the device, but they
cannot upgrade the host software, add/delete/modify users, or backup/restore the application
file.
• Management—Users of this level can perform any operations for the device.
Introduction to the Web-based NM functions
User level in Table 1 indicates that users of this level or users of a higher level can perform the
corresponding operations.
Table 1 Web-based NM function description
Function menu Description User level
Device Information
Device Information
Displays and allows you to
refresh device information,
broadband connection
information, 3G wireless
card state, LAN information,
WLAN information, services
information, and recent
system logs.
Monitor
Integrated Service Management
Displays the URL address on
a card.
Monitor
Allows you to change the
URL address of a card, and
log in to the Web interface
of the card.
Configure
Wizard Basic Configuration Wizard
Guides you through the
basic service configuration
of routers.
Configure
Interface
Setup
WAN
Interface
Setup
WAN Interface Setup
Displays the configuration
information of a WAN
interface, and allows you to
view interface statistics.
Monitor
Allows you to modify WAN
interface configuration, and
clear the statistics of a WAN
interface.
Configure
LAN Interface
Setup
VLAN Setup
Displays the configuration
information of a VLAN.
Monitor