Configuring dns proxy, Enabling dynamic domain name resolution – H3C Technologies H3C MSR 50 User Manual
Page 220
199
Configuring DNS proxy
Task Remarks
Required.
Enable DNS proxy on the device.
Disabled by default.
Required.
Not specified by default.
You can specify up to six DNS servers.
Enabling dynamic domain name resolution
1.
From the navigation tree, select Advanced > DNS Setup > DNS Configuration to enter the
configuration page as shown in
.
2.
Select Enable for Dynamic DNS.
3.
Click Apply.
Figure 205 Dynamic domain name resolution configuration
This manual is related to the following products: