H3C Technologies H3C MSR 50 - Manual (Page 106)

85
3. Click the name of the specified client to view the link test information of the client.
Figure 57 Viewing link test information
Table 57 Field description
Field Description
No./MCS
• Rate number for a non-802.11n client.
• MCS value for an 802.11n client.
Rate (Mbps) Rate at which the radio interface sends wireless ping frames.
TxCnt Number of wireless ping frames that the radio interface sent.
RxCnt Number of wireless ping frames that the radio interface received from the client.
RSSI
Received signal strength indication. This value indicates the client signal strength
detected by the AP.
Retries Total number of retransmitted ping frames.
RTT(ms) Round trip time.
Wireless access service configuration examples
Wireless service configuration example
Network requirement
As shown in Figure 58 , enable the wireless function on the device to enable the client to access the
internal network resources at any time. More specifically:
• The device provides plain-text wireless access service with SSID service1.
• 802.11g is adopted.