H3C Technologies H3C MSR 50 - Manual (Page 130)

109
Figure 103 Enabling the client mode
c. Select the option corresponding to 802.11g and click Enable.
With the client mode enabled, you can check the existing wireless services in the wireless
service list.
Figure 104 Checking the wireless service list
2. Connect the wireless service
a. Click the Connect icon of the wireless service psk in the wireless service list.
A SET CODE dialog box shown in
Figure 105 appears.
Figure 105 Setting a code
b. Specify the AuthMode as RSN+PSK.
c. Specify the CipherSuite as CCMP/AES.
d. Set the Password to that on the AP, 12345678.
e. Click Apply.