H3C Technologies H3C MSR 50 User Manual
Page 115
94
Figure 75 Creating a wireless service
c.
Select radio unit 1.
d.
Set the wireless service name as mac-auth.
e.
Select the wireless service type clear.
f.
Click Apply.
2.
Configure MAC authentication:
After you create a wireless service, the wireless service configuration page appears. Then you can
configure MAC authentication on the Security Setup area.
Figure 76 Configuring security settings
a.
Select Open-System from the Authentication Type list.
b.
Select the Port Set option, and select mac-authentication from the Port Mode list.
c.
Select the MAC Authentication option, and select system from the Domain list.
d.
Click Apply.
3.
Enable the wireless service:
a.
Select Interface Setup > Wireless > Access Service from the navigation tree.