H3C Technologies H3C MSR 50 - Manual (Page 641)

256
Figure 637 Local number binding page
a. Configure local number binding as describe in Table 236 .
b. Click the box in front of the ID column, and click Apply.
Table 236 Configuration items
Item Description
Binding Mode
• Permit the calls from the number group.
• Deny the calls from the number group.
A local number can be bound to multiple number groups in the same binding mode, that is, a local
number can either permit or deny the calls from bound number groups.
3. Bind call routes to the call number group:
Click Not Bound in the Call Routes Bound column on the Number Group tab page to access the call
route binding page.
The configuration of call route binding is similar to that of local number binding, and is not shown.
A call route can be bound to multiple number groups in the same binding mode, that is, a call route
can either permit or deny the calls from bound number groups.
4. Bind IVR numbers to the call number group:
Click Not Bound in the IVR Numbers Bound column on the Number Group tab page to access the
IVR number binding page.
The configuration of IVR number binding is similar to that of local number binding. Therefore, it is
not included here.
Configuring a max-call-connection set
When you configure a max-call-connection set, first configure a max-call-connection set and specify the
maximum number of call connections in this set, and then bind the local numbers, call routes, or IVR
numbers to the max-call-connection set.
1. Add a max-call-connection set:
a. Select Voice Management > Dial Plan > Call Authority Control from the navigation tree.
b. Click the Max-Call-Connection Set tab.
The max-call-connection set configuration page appears.