Verifying the configuration, Remote 802.1x authentication configuration example, Network requirements – H3C Technologies H3C MSR 50 User Manual

Page 119: Configuring the router

Figure 83 Adding an account

Verifying the configuration

During authentication, the user does not need to input the username or password. After passing MAC

authentication, the client can associate with the device and access the WLAN. You can view the online
clients by selecting Interface Setup > Wireless > Summary from the navigation tree and then clicking the

Client tab.

Remote 802.1X authentication configuration example

Network requirements

Use IMC as a RADIUS server for AAA. On the RADIUS server, configure the client’s username as user,

password as dot1x, and shared key as expert. The IP address of the RADIUS server is 10.18.1.88.
On the device, configure the shared key as expert, and configure the device to remove the domain name
of a username before sending it to the RADIUS server. The IP address of the device is 10.18.1.1.

Figure 84 Network diagram

Configuring the router

Configure wireless service:

Select Interface Setup > Wireless > Access Service from the navigation tree.

Click Add.

This manual is related to the following products:

H3C MSR 30 H3C MSR 2600 H3C MSR 20-2X[40] H3C MSR 20-1X H3C MSR 930 H3C MSR 900