H3C Technologies H3C MSR 50 - Manual (Page 118)

97
c. Click Add.
d. On the page that appears, enter 12345678 as the Shared Key, keep the default values for
other parameters, select or manually add the access device with the IP address 10.18.1.1,
and click OK.
Figure 81 Adding an access device
2. Add a service:
a. Click the Service tab.
b. Select User Access Manager > Service Configuration from the navigation tree.
c. Click Add.
d. On the page that appears, set the service name as mac, keep the default values for other
parameters, and click OK.
Figure 82 Adding a service
3. Add an account:
a. Click the User tab.
b. Select User > All Access Users from the navigation tree.
c. Click Add.
d. On the page that appears, enter username 00146c8a43ff, set the account name and
password both as 00146c8a43ff, select the service mac, and click OK.