H3C Technologies H3C MSR 50 - Manual (Page 154)

133
h. Click Apply.
Figure 130 Enabling CAC
a. Enable CAC for AC_VI in the same way: select Interface Setup > Wireless > Wireless QoS from
the navigation tree, click the QoS Service tab, find the radio unit to be configured in the list,
and click the corresponding
icon in the Operation column.
Figure 131 Setting CAC client number
j. Select the Client Number option, and then input 10.
k. Click Apply.
Verifying the configuration
If the number of existing clients in the high-priority ACs plus the number of clients requesting access is
smaller than or equal to the user-defined maximum number of users allowed in high-priority ACs, which
is 10 in this example, the request is allowed. Otherwise, the request is rejected.
Static rate limiting configuration example
Network requirements
As shown in Figure 132 , two clients access the WLAN through a SSID named service1. Limit the
maximum bandwidth per client to 128 kbps on the device.