H3C Technologies H3C MSR 50 - Manual (Page 345)

324
Configuring an MST region
1. From the navigation tree, select Advanced > MSTP > Region.
Figure 328 MST region
2. Click Modify.
The MSTP region configuration page appears, as shown in
Figure 329 .
Figure 329 Modifying an MST region
Table 144 Configuration items
Item Description
Region Name
MST region name.
The MST region name is the bridge MAC address of the device by default.
Revision Level Revision level of the MST region.
Manual (Instance ID
and VLAN ID) Manually add VLAN-to-instance mappings. Click Apply to add a
VLAN-to-instance mapping entry to the list.