H3C Technologies H3C MSR 50 - Manual (Page 611)

226
Figure 612 Configuring hunt group
b. Select Enable for Hunt Group.
c. Click Apply.
Perform the same configuration for the local number 1000 of Telephone A2. The configuration
procedure is not included here.
Verifying the configuration
Dial number 1000 from Telephone B (2000). Because Telephone A1 has a higher priority, Telephone B
is connected to Telephone A1. If you dial number 1000 from Telephone C (3000) when Telephone A1
and Telephone B are in a conversation, hunt group enables Telephone C to have a conversation with
Telephone A2.
Configuring three-party conference
Network requirements
As shown in Figure 613 , place a call from Telephone A to Telephone B and after the call is established,
hold the call on Telephone B. Then, place a call from Telephone B to Telephone C. After success, press
the hook flash on Telephone B and press 3. Then a three-party conference can be established among
Telephones A, B, and C.