H3C Technologies H3C MSR 50 - Manual (Page 422)

37
Step Remarks
10. Configuring authentication policies
Optional.
Configure authentication methods and authentication
parameters for an SSL VPN domain.
IMPORTANT:
Local authentication is always enabled. To use other
authentication methods, you must manually enable them.
11. Configuring a security policy
Optional.
Configure the check items and protected resources for a
security policy. Only user hosts that pass the security
policy's check can access the configured resources.
IMPORTANT:
To perform security check for user hosts, you must also
enable security check in the domain policy.
12. Customizing the SSL VPN user interface
Optional.
Customize service interfaces for SSL VPN users.
Configuring the SSL VPN service
Before you configure the SSL VPN service, go to Certificate Management to configure a PKI domain and
get a certificate for the SSL VPN gateway. An administrator or user uses the certificate to authenticate the
SSL VPN gateway to avoid logging in to an invalid SSL VPN gateway. For more information about
certificates, see "Managing certificates."
1. Select VPN > SSL VPN > Service Management from the navigation tree to enter the service
management page.
Figure 403 Service management
2. Configure the SSL VPN service information as described in Table 166 .
3. Click Apply.
Table 166 Configuration items
Item Description
Enable SSL VPN Select the box before this item to enable the SSL VPN service.
Port
Specify the port for providing the SSL VPN service. The default port number is
443.