H3C Technologies H3C MSR 50 - Manual (Page 297)

276
SNMPv1/v2c configuration example
Network requirements
As shown in Figure 278 , the NMS at 1.1.1.2/24 uses SNMPv1 or SNMPv2c to manage the SNMP agent
at 1.1.1.1/24, and the agent automatically sends traps to report events to the NMS.
Figure 278 Network diagram
Configuring the agent
1. Enable SNMP:
a. Select Advanced > SNMP from the navigation tree, and you will enter the Setup page. Perform
the following configuration as shown in
Figure 279 .
b. Select the Enable radio box.
c. Set the SNMP version to both v1 and v2c.
d. Click Apply.
Figure 279 Enabling SNMP
2. Configure an SNMP community:
a. Click the Community tab and then click Add. Perform the following configuration as shown
in
Figure 280 .
b. Type public in the field of Community Name.
c. Select Read only from the Access Right list.
d. Click Apply.