H3C Technologies H3C MSR 50 User Manual
Page 314
293
Figure 304 Assigning Ethernet 1/1 to bridge set 2 and enable VLAN transparency
b.
Select Ethernet1/1 from the Interface list.
c.
Select 2 from the Bridge Group list.
d.
Select Enable from the VLAN Transmit list.
e.
Click Apply.
# Assign Ethernet 1/2 to bridge set 2, and enable VLAN transparency.
Figure 305 Assigning Ethernet 1/2 to bridge set 2 and enable VLAN transparency
b.
Select Ethernet1/2 from the Interface list.
c.
Select 2 from the Bridge Group list.
d.
Select Enable from the VLAN Transmit list.
This manual is related to the following products: