H3C Technologies H3C MSR 50 - Manual (Page 779)

394
Figure 781 Configuring alone mode
2. Select Enable for Server Running State.
3. Enter 2.1.1.2 in IP Address Bound to the Server.
4. Select Alone for Server Operation Mode.
5. Click Apply.
# Configure user 1000.
6. Select Voice Management > SIP Local Survival > User Management from the navigation tree, and
click Add to access the following page.
Figure 782 Configuring a user
7. Enter 1000 for User ID.
8. Enter 1000 for Telephone Number.
9. Enter 1000 for Authentication Username.
10. Enter 1000 for Authentication Password.
11. Click Apply.
# Configure users with phone numbers 1111, 5000, and 5555 in the similar way.