H3C Technologies H3C MSR 50 - Manual (Page 298)

277
e. Click the Community tab and then click Add. Perform the following configuration as shown
in Figure 281 .
Figure 280 Configuring SNMP community named public
Figure 281 Configuring SNMP community named private
f. Type private in the field of Community Name.
g. Select Read and write from the Access Right list.
h. Click Apply.
3. Enable Agent to send SNMP traps:
a. Click the Trap tab and perform the following configuration as shown in Figure 282 .
b. Select the Enable SNMP Trap box.
c. Click Apply.